Other equipment UKRE'LEKTROAPPARAT EM, EPZ-100, RLNDz, etc.

---

Electric boiler EM (power consumption from 100 to 600 kW) are designed for heating communal, cultural and household premises, buildings for education, upbringing and training of personnel and other premises remote from central water supply sources, technological processes in agriculture.

• EM 100...600. Technical specifications.

---

Electric heaters EPZ-100 are used for heating communal, cultural and household premises, buildings for education, upbringing and training of personnel and other premises remote from the sources of central water supply, technological processes in agriculture.

• EPZ-100. Technical specifications.

---

High-voltage disconnectors of the RLNDz-10/400 U1 and RLNDz-10/630 U1 types are designed for universal use in high-voltage networks of 6 or 10 kV and at open AC substations with a frequency of 50 Hz for network partitioning.

• RLDZ. Technical specifications.

---

Current-limiting and smoothing reactors are used to limit short-circuit currents in electrical networks with a frequency of 50 and 60 Hz. Reactors can be used as inductive resistance in diode rectification circuits and in thyristor converter circuits.

• Current-limiting and smoothing reactors. Technical specifications.

---

VNPRZ-10-630 switches are designed to work in cabinets of complete switchgear (CRU), stationary one-way service chambers (CSR) and cabinets of complete transformer substations (KTP) of internal installation for a voltage class up to 10 kV

• VNPRZ-10-630. Technical specifications.

---

The input and distribution device VRU 1-XX for indoor installation in residential and public buildings is designed for receiving, distributing and accounting for electric energy with a voltage of 380/220 V of three-phase alternating current with a frequency of 50 Hz.

• I LIE 1-XX. Technical specifications.

---

Prefabricated single-sided service chambers of the CSR 210, CSR 310 series and bus bridges to them are designed to complete switchgears (CSR 210) and dead-end substations (CSR 310) with a voltage of 6 or 10 kV AC, a frequency of 50 Hz

• CSR 210, CSR 310. Technical characteristics.

---

Complete input devices of KUVPNKS are designed to connect no more than 3 complete transformer substations of KTPPNKS TU16-674.055-85 for each input during oil production or other consumers to two 6-10 kV power supply lines.

• KUVPNKS. Technical specifications.

---

Disconnectors of the RDz-35/1000 U1 type are designed for universal use in high-voltage networks of 35 or 27.5 kV and at open AC substations with a frequency of 50 Hz for partitioning networks and disconnecting consumers from the network.

• RDz-35/1000 U1. Technical specifications.

---

High-voltage three-pole disconnectors of the cutting type of the RRz series and manual drives to them of the PR-10 type are designed for universal use in high-voltage networks of 6 or 10 kV alternating current with a frequency of 50 Hz

• PPz. Technical specifications.

---

The UKP-04 reactive power compensation units are used to compensate for the reactive power of inductive electrical receivers and are designed to maintain a constant set value of the power factor.

• UKP-04. Technical specifications.

---

Distribution cabinets of low voltage SRNN are designed for completing input and distribution devices with a voltage of 0.4 kV AC with a frequency of 50 Hz.

• SRNN. Technical specifications.

---

Panels of switchboards SCHO 94 are designed for receiving and distributing electrical energy of three-phase alternating current, with a frequency of 50 Hz at a voltage of up to 0.66 kV and protecting outgoing lines from overload and short-circuit currents.

• SCHO 94. Technical specifications.

---

The devices of the KUPNA 700 series are designed to control and protect submersible pumping units of reservoir waters into oil horizons, as well as pumping oil with electric motors with a capacity of 125 to 700 kW.

• The COUPON IS 700. Technical specifications.

---

Catalog